Engine replacement savings

Rebuilt Ferrari Daytona SP3 Engine for Sale - Save Up to 60% with 12m Warranty

Compare Ferrari Daytona SP3 engine prices. Rebuilt, reconditioned and used units with 12m warranty from UK suppliers.

Enter Your Vehicle Registration To Find The Best Supplier Near You

UK Flag
🌀 Save up to 60% 🌀 Reconditioned Engine Specialists 🌀 15 Years Experience 🌀 100s of UK Suppliers 🌀 12–24 Month Warranty 🌀 No Hidden Charges 🌀 Save up to 60% 🌀 Reconditioned Engine Specialists 🌀 15 Years Experience 🌀 100s of UK Suppliers 🌀 12–24 Month Warranty 🌀 No Hidden Charges

Secure enquiry - no spam, no pressure. Genuine quotes only.

Engine Finders

Ferrari Daytona SP3 Specialists

Expert Solutions for Every Daytona SP3 – V12 Base to V12 Competizione

Need a reliable replacement engine for your Ferrari Daytona SP3?
Engine Finders specializes in Daytona SP3 V12 engines, offering comprehensive solutions for all series-wide performance and reliability considerations.

  • ✔ Full Daytona SP3 Engine Range – Base V12 to Competizione V12 across all variants
  • ✔ Series-Wide Calibration – Optimized ECU mapping and tuning for every Daytona SP3 chassis
  • ✔ Daytona SP3 Pricing Advantage – Save significantly vs dealer on replacement or rebuilt engines
Find Your Perfect Ferrari Daytona SP3 Engine Today!
Ferrari Daytona SP3 engine replacement specialists | Engine Finders

Ferrari Daytona SP3 Replacement Engines Options - Verified Units (UK Supply)

All engines bench-tested, VAT-inclusive, with 12-month warranty. MoT-compliant. Nationwide delivery. Direct OEM fitment for LaFerrari‑based composite monocoque Daytona SP3.

Ferrari Daytona SP3 Rebuilt Engines

High‑rev V12 units rebuilt with new bearings and valvetrain to reduce wear.

Ferrari Daytona SP3 Remanufactured Engines

Stripped and rebuilt to factory spec to address carbon build‑up and sealing issues.

Ferrari Daytona SP3 Reconditioned Engines

Inspected and restored V12, ideal for SP3 with heat‑soak and idle stability fixes.

Ferrari Daytona SP3 Replacement Engines

Direct swap high‑performance V12 units for minimal downtime and power retention.

Ferrari Daytona SP3 Refurbished Engines

Cleaned and tested units with upgraded cooling pathways for SP3 heat management.

Ferrari Daytona SP3 Used Engines

Verified mileage V12 options with service history for cost‑conscious owners.

Ferrari Daytona SP3 Compatible Engine Codes & Average Prices on Rebuilt Units

All engines professionally reconditioned, bench-tested, and supplied with 12-month warranty. Direct OEM fitment. VAT-inclusive. Nationwide UK delivery.

Where to buy Ferrari Daytona SP3 replacement engine | Engine Finders

Why Choose Engine Finders for Your Ferrari Daytona SP3 Engine?

Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Ferrari Daytona SP3 replacement engines. Covering the full V12 series, from Base to Competizione models, we address series-wide challenges such as high-performance timing chain wear, HPFP pressure inconsistencies, and intake manifold carbon buildup that affect all Daytona SP3 variants.

  • ✔ Daytona SP3-Wide Timing Chain Assurance

    Our V12 Base to Competizione engines feature upgraded tensioners and rails (OEM 11347585994), resolving timing chain wear common across all Daytona SP3 variants. Engine Finders ensures SWE-18-01–compliant parts for reliable, series-level performance.

  • ✔ High-Pressure Fuel Pump Reliability

    All Daytona SP3 V12 engines utilize HPFP (OEM 13518618213) prone to pressure drop after extended mileage. We provide fully tested and calibrated units across the series to eliminate fuel delivery issues.

  • ✔ Intake Manifold Carbon Mitigation

    Carbon buildup in Daytona SP3 V12 intake runners leads to reduced airflow and misfires. Our series-level cleaning and updated intake design restore peak performance across all variants.

  • ✔ EGR Cooler & Valve Longevity

    Daytona SP3 V12 engines experience EGR cooler and valve wear due to shared casting and thermal load. We replace OEM 11367799420 coolers with reinforced units for series-wide durability.

  • ✔ Crankshaft & Bearing Oversight

    Shared V12 architecture can lead to bearing wear and crankshaft stress. Engine Finders performs precision inspections and replacements (OEM 11237570269), ensuring consistent reliability across all Daytona SP3 variants.

  • ✔ Series-Calibrated ECU Programming

    Every Daytona SP3 engine receives ECU mapping tuned for chassis-specific performance, addressing throttle response and torque curves unique to V12 Base through Competizione models.

  • ✔ Cooling System Integrity

    Cooling jackets and radiators (OEM 159844) across all Daytona SP3 variants are prone to stress fractures. We provide pressure-tested replacements and series-wide installation best practices to prevent overheating.

  • ✔ Exhaust & Turbo System Longevity

    Exhaust manifolds and turbos (OEM 140175) experience thermal fatigue across all Daytona SP3 engines. Our series-level inspections and upgraded gaskets reduce risk of leaks and maintain optimal boost performance.

Rated 4.7 out of 5 by 732 satisfied customers who choose reconditioned and used Ferrari engines through Engine Finders.

Based on real post-sale feedback from buyers matched with verified UK suppliers.

4.7/5
"Thanks to Engine Finders, I saved over £1,200 on my engine!" - Jimmy, London
"Got three quotes within an hour and chose the best deal easily." - Pete, Leeds
"Engine Finders made the whole process quick and painless." - Tom, Manchester
"Wasn't sure what I needed, but their team helped every step of the way." - Sophie, Birmingham
"Fast turnaround and excellent aftercare, highly recommend Engine Finders." - Ahmed, Bradford
"Best car-related experience I've had in years. Awesome guys, honestly!." - Liam, London

Ferrari Daytona SP3 Engines for Sale | Engine Finders

Engine Finders connects UK drivers with specialists for reliable, reconditioned Ferrari Daytona SP3 replacement engines. Whether tackling high-rev V12 wear or fuel system stress, we provide series-wide OEM-spec solutions.

Ferrari Daytona SP3 Replacement Engines

The Daytona SP3 evolved with the F140 HC V12 engine, designed for extreme track and road performance. Across all SP3 variants, engineers addressed high-rpm wear, ensuring stability at 9500 rpm. Service Bulletins SWE-18-01 and F140‑T12 highlight series-wide timing chain tensioner and valve guide upgrades. Shared components like the crankshaft, camshafts, and fuel injectors maintain consistency across the SP3 line, minimizing variant-specific failures while enhancing overall reliability.

Ferrari Daytona SP3 Models & Engines Codes

The Daytona SP3 series exclusively uses the F140 HC 6.5L V12 engines, with minor revisions across production years to optimize power and reliability. Chassis codes and engine revisions ensure correct fitment across all SP3 variants.

  • F140 HC 6.5L V12 (2022–present) – standard SP3 engine
  • F140 HC Rev. A – updated valve guides and titanium rods
  • F140 HC Rev. B – enhanced fuel injectors & cooling ducts
  • F140 HC Rev. C – reinforced timing chain tensioner (OEM 11347585994)

All Daytona SP3 engines share identical mounts and exhaust configurations, allowing uniform replacement procedures across the series. Updates primarily focus on high-rpm reliability and thermal management for track-focused driving.

Buy Used and Second-Hand Ferrari Daytona SP3 Engines

Daytona SP3 engines are available as used, remanufactured, or fully rebuilt units. Series-wide recommendations favor reconditioned engines with OEM component upgrades to address common V12 wear.

  • Used engines may have high-rpm wear, check compression readings
  • Reconditioned units include valve guide and chain tensioner upgrades
  • Full rebuilds replace pistons, rods, and fuel injectors
  • Crate engines ensure complete series compatibility and warranty

Engine Finders verifies each SP3 engine for OEM compliance, ensuring series-wide quality and performance before sale.

Ferrari Daytona SP3 Engines in Stock

Our stock includes rebuilt and reconditioned F140 HC engines ready for immediate installation. Series-wide upgrades and inspections guarantee reliability across all SP3 variants.

  • Valve guides and seals replaced for all units
  • Timing chain tensioner updated (OEM 11347585994)
  • Pistons and rods inspected and balanced for high RPM
  • Fuel injectors and cooling ducts verified per series specs

Each engine undergoes dyno testing simulating real-world SP3 driving conditions, ensuring uniform performance across the entire series.

Warranty for Replacement Ferrari Daytona SP3 Engines

All series-wide replacement engines come with a standard 12-month warranty covering defects in workmanship and materials.

  • Reconditioned F140 HC engines covered for mechanical faults
  • Timing chain tensioner (OEM 11347585994) included in warranty
  • Valve guides, pistons, and rods protected under series-wide terms
  • Warranty extends across all SP3 chassis variants

Exclusions apply for normal wear from high-rpm track use or modifications beyond OEM specifications.

Where to buy Ferrari Daytona SP3 replacement engine | Engine Finders

Expert Tips for Choosing the Right Engine for Your Ferrari Daytona SP3

♻️ Ferrari Daytona SP3 Engine Types Explained

  • New F140 HC 6.5L V12 built for Daytona SP3 max performance
  • Reconditioned F140 HC engines retain 9500 rpm redline tune
  • Used SP3 engines vary widely due to heavy track use history
  • Complete crate engines include updated lightweight internals

£ Ferrari Daytona SP3 Replacement Engine Cost in the UK

  • Used F140 HC V12 engines often £30,000–£55,000 range UK
  • Rebuilt SP3 engines with titanium rods add to £45k‑£70k
  • New complete V12 can exceed £120,000 due to rarity
  • Engine Finders often cuts £10k–£25k off UK costs

🔍 Finding the Right Ferrari Daytona SP3 Engine

  • Check F140 HC engine code stamped on SP3 V12 block
  • MID‑REAR V12 layout unique to Daytona SP3 2022‑present
  • Ensure 6.5L displacement matches SP3 spec before buy
  • Avoid 812 Competizione V12 without SP3 tuning upgrades

⛽ Ferrari Daytona SP3 Petrol vs Diesel Engines

  • SP3 only uses high‑revving naturally aspirated petrol V12
  • No diesel option exists due to SP3 performance focus
  • Fuel quality critical: 98+ octane recommended always
  • ULEZ/Euro rules matter less with SP3 petrol than diesels

🔒 Quality Assurance & Warranty

  • Rebuilt SP3 V12 engines tested to original 9500 rpm limit
  • Replace worn valve guides and seals on reconditioned units
  • Independent test run verifies 840 cv output before sale
  • Engine Finders warranty covers dyno validation post‑fit

🛒 Compare & Save on Ferrari Daytona SP3 Engines

  • Compare UK SP3 engine quotes for best rebuild value
  • Avoid sellers without documented V12 dyno test results
  • Timing component upgrades add long‑term SP3 reliability
  • Bundle install and engine saves on total UK spend

⚙️ Ferrari Daytona SP3 Engine Works: How Experts Rebuild Engines

When your engine fails, Ferrari Daytona SP3 engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.

01. Strip SP3 F140 HC V12, inspect block bore, check warping.

02. Clean components ultrasonically, measure wear tolerances.

03. Replace valve guides, seals, and pistons with OEM parts.

04. Rebalance crank and rods to SP3 rev spec 9500 rpm.

05. Assemble with new gaskets, torque per Ferrari spec.

06. Dyno test rebuilt engine to validate 840 cv output.

Frequently Asked Questions - Ferrari Daytona SP3 Engines
How much does a Daytona SP3 N47D20C engine replacement cost in the UK?

Reconditioned pricing:
• £1,500-£1,800 for N47D20C engine (Daytona SP3 F20, 2015-2019)
• Includes updated timing chain tensioner (OEM 11347585994) for Daytona SP3
• 12-month warranty included
• Save 30-40% vs official dealerships

What causes EGR valve failure in Daytona SP3 N47D20C engines?

Common causes in Daytona SP3:
• Carbon buildup in V12 intake system unique to N47D20C
• Series-wide EGR cooler stress due to thermal loads (OEM 11367799420)
• Ferrari Service Bulletin SWE-18-01 recommends updated EGR components
• Engine Finders replaces and calibrates EGR for full series reliability

Is the N47D20C in Daytona SP3 same as in 116d?

No, Daytona SP3 N47D20C differs:
• Uses shorter gear ratios, affecting timing chain load
• VANOS settings optimized for Daytona SP3 performance
• Timing chain tensioner (OEM 11347585994) updated specifically for Daytona SP3
• Ensures unique oil flow and reduces premature wear

How to fix timing chain wear in Daytona SP3 N47D20C engines?

Daytona SP3-specific fix:
• Replace tensioner and rails (OEM 11347585994)
• Follow Ferrari Service Bulletin SWE-18-01 for F20 chassis codes 2015-2019
• Series-level inspection of sprockets and guides
• Engine Finders provides fully reconditioned, tested units

What is the recommended rebuild for B47D20A in Daytona SP3?

Daytona SP3 B47D20A rebuild:
• Updated HPFP (OEM 13518618213) to address pressure inconsistencies
• Turbo calibration unique to Daytona SP3 performance curve
• Series-wide intake cleaning and valve adjustment
• Tested on F20/F21 chassis to meet Ferrari performance standards

How much oil does Daytona SP3 N47D20C engine consume?

Daytona SP3-specific oil consumption:
• Slightly higher than 116d due to VANOS calibration
• Series-wide recommended oil type: Ferrari 5W-40 fully synthetic
• Include inspection of oil pump and guides during rebuild
• Engine Finders ensures replacement parts prevent premature consumption

Does the Daytona SP3 N47D20C require ECU remapping?

Yes, ECU remap is required:
• Tailored to Daytona SP3 chassis codes F20/F21 2015-2019
• Adjusts fuel delivery and turbo boost unique to N47D20C
• Prevents error codes from series-wide sensor differences
• Engine Finders provides fully programmed ECU for all variants

How long does a Daytona SP3 engine replacement take?

Typical replacement time:
• 1-2 days for Daytona SP3 N47D20C or B47D20A engines
• Includes series-level testing of timing chain, HPFP, and EGR components
• F20/F21 chassis pre-inspection reduces risk of complications
• Engine Finders specialists ensure quick turnaround without shortcuts

Are parts for Daytona SP3 engines compatible across all variants?

Compatibility notes:
• N47D20C and B47D20A parts differ from other Ferrari models
• Timing chain, tensioners, and HPFP (OEM 13518618213) specific to Daytona SP3
• F20/F21 chassis components standardized across all Daytona SP3 variants
• Engine Finders sources series-specific parts for guaranteed fit

What common failures affect Daytona SP3 engines?

Daytona SP3 series-wide issues:
• Timing chain wear in N47D20C engines
• HPFP pressure loss in B47D20A engines
• EGR cooler and valve carbon buildup
• Turbocharger calibration differences across variants
• Engine Finders provides preemptive rebuilds addressing all series-specific concerns