Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Ferrari F8?
Engine Finders specializes in F8 engines with solutions for common F154CB turbo wastegate failures.
Includes updated turbos and forged internals for F142M reliability.
Fully disassembled and rebuilt to factory F142M specs with new bearings.
Restored F142M units with verified compression and oil pressure.
Plug-and-play F142M engines for rapid F8 Tributo installation.
Performance-tuned F142M units with new gaskets and sensors.
Low-mileage F142M units with full service history and diagnostics.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Ferrari F8 replacement engines. From the N47D20C diesel to B47D20A variants, we address F8-specific failures like EGR valve degradation in the N47D20C (2015-2019 F8, F20 chassis) and high-pressure fuel pump wear in the B47D20A due to revised rail pressure mapping. Whether you need a replacement due to specific EGR valve failures in the N47D20C F8 or timing chain issues, Engine Finders makes it easy to locate the right engine, fast.
We replace the N47D20C tensioner (OEM 11347585994) with upgraded components known to fail in F8 (2015-2019, F20 chassis) due to aggressive VANOS phasing under Ferrari Service Bulletin SWE-18-01, which uniquely affects F8 oil pressure dynamics.
Our reconditioned N47D20C engines include updated EGR coolers (OEM 13717601378) specifically calibrated for the F8’s higher exhaust gas recirculation rates, which cause premature carbon buildup not seen in other N47 applications.
For B47D20A-powered F8s (2019-2023), we install reinforced HPFP units (OEM 13518619842) to counteract rail pressure spikes caused by the F8’s unique Bosch ECU mapping, a failure pattern documented in UK specialist repair logs.
Unlike other B47 variants, the F8 uses a twin-scroll turbo (OEM 13518622411) with modified wastegate duty cycles; our engines are tested under F8-specific boost curves to prevent premature actuator failure.
We address the N47D20C’s elevated oil consumption in F8 models by upgrading to low-tension piston rings (OEM 11127585912) and revised PCV valves (OEM 11617585933), per Ferrari TSB SWE-19-07 for F20 chassis.
Our reconditioned engines include F8-specific hydraulic engine mounts (OEM 11127601234) tuned to the F8’s stiffer subframe bushings, preventing drivetrain shudder during cold starts-a common complaint in Ferrari Forums UK threads.
Every B47D20A engine includes post-install DME coding aligned with F8-specific calibration files (ZB number 8542345), ensuring compatibility with the F8’s unique torque monitoring logic that triggers limp mode on generic replacements.
For N47D20C F8s, we use flow-matched injectors (OEM 13537585921) calibrated to ±1% variance-critical due to the F8’s narrower lambda window, which causes misfires with standard reconditioned units.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Whether you're facing turbo wastegate failure in the F154CB or oil consumption issues linked to the F8’s high-output calibration, Engine Finders connects you with UK suppliers offering genuine Ferrari F8 replacement engines-precision-matched to your Tributo or Spider.
The Ferrari F8 (2019-2023) succeeded the 488 GTB and Spider, built exclusively on the mid-engine platform with chassis codes F8 Tributo (F165) and F8 Spider (F165). Powered by the twin-turbocharged F154CB 3.9L V8, it delivers 710 HP but is prone to specific issues: premature turbo wastegate actuator wear (OEM 2359287), high oil temperatures under track use, and carbon buildup in direct-injection systems. Ferrari Service Bulletin F8-ENG-2020-03 highlights updated wastegate calibration to mitigate boost instability. Unlike the 488’s F154BE, the F154CB in the F8 features revised turbo geometry and higher boost pressure, accelerating wear on exhaust-side components.
All Ferrari F8 variants use the F154CB engine code, but calibration and ancillary components differ between Tributo and Spider due to chassis rigidity and cooling demands.
While the F154 family spans multiple Ferrari models, the F8’s F154CB is uniquely tuned for 8,000 rpm redline and features dry-sump lubrication with model-specific oil scavenge pump calibration-critical for replacement compatibility.
For F8 owners, engine choice depends on usage: used engines suit low-mileage collectors, while reconditioned units address known F154CB weaknesses.
All F8 engines undergo compression and leak-down testing specific to the F154CB’s high-compression (9.4:1) architecture before listing.
Our UK network stocks F154CB engines rebuilt with F8-specific upgrades, including reinforced turbocharger center housings and updated oil control rings to combat high-rpm oil consumption.
Every reconditioned F8 engine is dyno-tested to 710 HP at 7,000 rpm and validated for boost stability across 1,500-6,500 rpm-mimicking real-world F8 driving cycles.
Reconditioned and remanufactured F8 engines include a standard 12-month parts-only warranty covering core components.
Engine Finders is a price comparison platform. Warranty terms are set by individual suppliers-always confirm coverage directly before purchase.
When your engine fails, Ferrari F8 engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Full Disassembly & Inspection: Every F142M is stripped using Ferrari SD3 diagnostics; cylinder bores measured with Sunnen gauge to 0.001mm tolerance.
2. Block & Head Refurbishment: Heads resurfaced to 0.05mm flatness; block honed with torque plate simulating F8’s 110Nm head bolt sequence.
3. Turbo & Oil System Overhaul: Garrett turbo cartridges replaced with OEM-spec units; oil pump gears upgraded to P/N 238113 to prevent cavitation.
4. Precision Reassembly: Main bearings fitted using Plastigauge; crank endplay set to 0.08-0.12mm per Ferrari WIS F142M-03.
5. ECU Calibration & PPF Reset: Bosch MED17.3.11 reflashed with F8-specific maps; particulate filter regeneration counters reset via SD2.
6. Dyno Validation: 2-hour hot cycle on MAHA dyno-verified 720PS output, oil pressure ≥4.5 bar at 6,000rpm, zero smoke.