Buy Honda 2.0L I4 i-VTEC (K20A2) Petrol Engine - 12 Month Unlimited Mileage Warranty

Premium 2.0L Petrol Engines (K20A2, i-VTEC) - Suitable for Civic Type R, Integra Type R, Accord Euro R, CR-V & More

Honda K20A2 High-Performance Petrol Engine

Honda K20A2 2.0L i-VTEC Petrol Engine

High-Revs, VTEC Power - Honda’s Performance Legacy

The Honda K20A2 2.0L i-VTEC is part of the acclaimed Honda K-series engine family, a successor to the B-series engines, engineered for high-revving performance and bulletproof reliability. Produced from 2001 to 2006, the K20A2 was primarily found in Honda’s performance vehicles and introduced significant advancements in engine technology. Key among these is the i-VTEC system - Honda’s intelligent Variable Valve Timing and Lift Electronic Control - which optimizes power output and fuel efficiency by adjusting camshaft profiles across RPM ranges.


With an all-aluminium DOHC inline-four configuration, the K20A2 features a forged steel crankshaft, a 2-stage VTEC system, and a high compression ratio of 11.0:1. This engine delivers impressive power output - up to 200hp - while maintaining everyday drivability and Honda’s signature smoothness. The lightweight block and low-friction design contribute to enhanced thermal efficiency and reliability, making it an ideal choice for daily drivers and track enthusiasts alike.


Praised for its durability, rev-happy nature, and tuning potential, the K20A2 has become one of the most sought-after petrol engines in the UK for reconditioning and engine swaps. Its popularity is especially strong among Honda enthusiasts seeking OEM-level performance combined with long-term reliability. Its compatibility with both manual and automatic transmissions enhances its versatility across the performance vehicle spectrum.

The K20A2 powers a range of iconic models, including the Honda Civic Type R EP3, known for its sharp handling and track-ready character, and the Honda Integra Type R DC5, a JDM classic revered for its balance and performance. Its strong aftermarket support and availability of reconditioned units make it a top contender in the UK engine replacement market.

Technical Specifications & Configuration

Engine Code
K20A2
Engine Size
1998cc / 2.0 Litres
Cylinder Configuration
Inline 4 cylinder (I4)
Aspiration
Naturally Aspirated
Fuel Type
Petrol
Injection System
Multi-Point Fuel Injection
Valvetrain
DOHC - 16 valves with i-VTEC
Compression Ratio
11.5:1
Cooling System
Water cooled
Block Material
Aluminium Alloy
Head Material
Aluminium Alloy
Emission Standard
Euro 3 / 4
Power Output Range
200 - 220 PS
Torque Output
196 - 215 Nm
Turbo Configuration
N/A
Fuel Economy (Est.)
25-35 MPG (varies by vehicle & driving style)

Common Configurations

  • Honda Civic Type R (EP3): 200 HP, 6-speed Manual, FWD
  • Honda Integra Type R (DC5): 217 HP JDM variant, 6-speed Manual
  • Honda Accord Euro R (CL7): 220 HP, 6-speed Manual, LSD
  • Honda CR-V (RD5 Japan): De-tuned 160-165 HP version, AWD option
  • Track-Spec Swaps: Used in Lotus Elise, Ariel Atom with K20A2 transplant

Noteworthy Engineering Highlights

  • 🛠️DOHC i-VTEC: Variable timing + lift for intake valves
  • 🧊Forged internals: Lightweight pistons and robust crankshaft
  • ⚙️High-revving nature: Redline over 8,000 RPM
  • 🔥Performance tuned ECU: Responsive throttle and aggressive mapping
  • 🔧Chain-driven timing: Durable and maintenance-friendly

Engine Naming Reference

K20A2, K20A, K-series, DOHC i-VTEC, Civic Type R engine, K20 iVTEC, Accord Euro R 2.0L, DC5 ITR engine, Honda K motor, K20 swap engine, K-series 200HP

Types of K20A2 i-VTEC Replacement Engines Available

K20A2 Rebuilt Engines

High-performance rebuilds with OEM-grade pistons, gaskets & timing chains.

K20A2 Remanufactured Engines

Every unit fully stripped and rebuilt to match factory tolerances.

K20A2 Reconditioned Engines

Carefully inspected, cleaned, and restored by seasoned petrol engine specialists.

K20A2 Replacement Engines

Direct-fit petrol engines ideal for quick swaps and no-hassle installations.

K20A2 Refurbished Engines

Budget-friendly, tested units with clean internals and compression-verified heads.

K20A2 Used Engines

Hand-selected from breakers and verified by our expert mechanics.

Compatible Models with K20A2 Engine

K20A2 Engine Applications


Honda Applications

Honda Logo
CIVIC TYPE R EP3 200 HP
2001-2005
K20A2 i‑VTEC (Europe variant)
INTEGRA TYPE R DC5 205 HP
2002-2004
K20A2 i‑VTEC (US/Canada variant)

Honda Applications

Honda Logo
RSX TYPE‑S (DC5) 205 HP
2002-2004 (US/CA)
K20A2 i‑VTEC (RSX Type‑S)
ACCORD EURO R CL7 220 HP
2002-2004 (JDM)
K20A2 i‑VTEC (Euro R)

⚠️ Note: If you're unsure whether your vehicle is fitted with the K20A2 engine, drop your chassis number or contact us for a free compatibility check.

Common K20A2 Engine Problems & Solutions


Pricing, Warranty & Availability

Most Popular

Rebuilt K20A2 i-VTEC Engine

From
£3,295
(Supply Only)
  • ✔ Fully Disassembled & Rebuilt
  • ✔ OEM-Grade Replaced Parts
  • ✔ Like-New Condition
  • ✔ 12-24 Month Warranty

Reconditioned K20A2 i-VTEC Engine

From
£2,750
(Supply Only)
  • ✔ Professionally Reconditioned
  • ✔ Thoroughly Inspected & Tested
  • ✔ Restored to OEM Standard
  • ✔ 12 Month Warranty
Cheapest Option

Used K20A2 i-VTEC Engine

From
£2,000
(Supply Only)
  • ✔ Basic Inspection
  • ✔ Compression Tested
  • ✔ Known Service History
  • ✔ 30 Days to 3 Month Warranty

Refurbished K20A2 i-VTEC Engine

From
£2,300
(Supply Only)
  • ✔ Partial Overhaul
  • ✔ Key Component Replacement
  • ✔ Cost-effective Option
  • ✔ 3 to 6 Month Warranty

📦 Stock Availability & Delivery Time

  • 🔄 High availability across UK suppliers
  • 🚚 Next-day delivery on in-stock units (supply only)
  • 🛠️ 7-10 day turnaround for rebuilt units
  • 📦 Free UK mainland delivery (select suppliers)

⭐ What You Get With Every K20A2 i-VTEC Engine

  • 🧰 OEM-quality rebuilds using Honda-approved parts
  • 🔎 Full inspection reports w/ compression & leak-down tests
  • 📋 Engine serial & block codes verified
  • 💬 UK-based support before & after sale
  • 🔄 Exchange options for faulty units
  • 🧾 Simple returns & warranty claims

K20A2 i-VTEC Engine Reconditioning Process


STEP 1 1 Day

Initial Inspection & Diagnostic Reporting

  • Visual & Dimensional Checks: Deck flatness, bore wear, and head warpage.
  • Oil & Coolant Analysis: Detect fuel dilution, glycol traces, or contamination.
  • Compression Testing: Verify ring and valve sealing before teardown.
STEP 2 1-2 Days

Complete Strip Down & Component Cleaning

  • Media Blast Cleaning: Remove carbon & sludge from internals.
  • Chemical Degreasing: Clean oil pump, HPFP, and turbo cores.
  • Part Identification: Catalog rods, pistons, and cams for traceability.
STEP 3 2-3 Days

Non-Destructive Testing & Machining

  • Crack Testing: Magnaflux and dye penetrant for structural faults.
  • Boring & Honing: Re-bore cylinders and hone for correct finish.
  • Crank Grinding: Undersize grind and dynamic balance.
  • Surface Milling: Flatness to <0.03mm deviation.
STEP 4 1 Day

Component Replacement with OEM Parts

  • Pistons & Rings: Forged internals matched to rebored block.
  • Timing Kit: New chain, guides, tensioner, sprockets.
  • Seals & Gaskets: All major gaskets and seals replaced.
  • Water & Oil Pump: New OEM pumps with updated specs.
STEP 5 1 Day

Assembly & Torque Angle Verification

  • Sequential Torque: Head & main bolts torqued to spec.
  • Phaser Setup: Cam phasers installed and OCVs verified.
  • Injector Setup: Calibrated with precision flow test bench.
STEP 6 1 Day

Hot Bench Dyno & Road Simulation

  • Cold Start Test: Oil pressure and tensioner function verified.
  • Load Simulation: Urban/motorway load profiles checked for leaks and stability.
  • Compression & Emissions: Ring seal and smoke tested before dispatch.
Honda  replacement engine - Engine Finders

Why Choose Engine Finders for K20A2 i-VTEC Diesel Engine?

At Engine Finders, we don’t just sell engines - we deliver peace of mind. Here’s why Honda owners across the UK trust us:

  • ✔ Trusted UK Suppliers

    We work exclusively with vetted UK suppliers who specialize in Honda engines - no middlemen, no guesswork.

  • ✔ Save Up to 60% vs Dealership

    Why overpay? Compare quotes from multiple sellers & save up to 60% on Honda replacement engines, get top-tier quality for less.

  • ✔ Tested & Certified Engines

    Every Honda engine is thoroughly tested for durability and performance, backed by a 6-24 month warranty.

  • ✔ Fast Quotes & Faster Delivery

    Quick quotes, nationwide delivery, and optional vehicle recovery, get your Honda back on the road in no time.

  • ✔ Expert Honda Engine Support

    Need help? Our friendly Honda specialists guide you through engine compatibility, specs, and installation process.

  • ✔ K20A2 i-VTEC Engines Specialists

    From Honda Jazz to CR-V, we offer all variants (120PS / 160PS).

  • ✔ Performance Matched with Experience

    Our remanufactured and reconditioned engines often meet or exceed OEM specs - ready for serious off-road and on-road action.

  • ✔ We Work for You - Not the Suppliers

    We’re 100% on your side, helping you choose the best engine deal instead of just pushing supplier specials.

Tuning & Performance Upgrades


Ready to Get Engine Quotes?

Enter your vehicle registration number and let Engine Finders find you the best replacement engine deals on Honda.

Just Add Your Reg & Click Go - It's That Simple

Flag Icon

Engine Finders instantly matches your vehicle with our trusted engine suppliers and garages near you. Save time. Save money. No stress.

Frequently Asked Questions - HONDA K20A2 2.0L I-VTEC

What is the service interval for a HONDA K20A2 engine?

For optimal longevity of the HONDA K20A2, we recommend an oil change and filter replacement every 5,000-7,500 miles or 6 months, whichever comes first. This is crucial for the VTEC system's function and to prevent sludge from clogging the Oil Control Valve (OCV) screen, which is a common issue.

What oil should I use in my HONDA K20A2?

The recommended engine oil for the HONDA K20A2 is a high-quality synthetic 5W-40 or 5W-30. It's essential to use a fully synthetic oil that meets API or ACEA standards to ensure the VTEC system operates correctly and to provide adequate lubrication under high-RPM conditions. Always check the owner's manual for specific viscosity recommendations.

What are the common issues with the K20A2 engine?

While highly reliable, the K20A2 can experience a few common issues. These include a weak timing chain tensioner leading to a rattle on startup, the VTEC solenoid gasket leaking oil, and the Oil Control Valve (OCV) screen becoming clogged, which can affect VTEC engagement. High mileage engines may also show signs of increased oil consumption due to worn piston rings.

Is the HONDA K20A2 a good engine for a swap?

Yes, the HONDA K20A2 is an extremely popular choice for engine swaps due to its compact size, robust design, and excellent performance potential. It’s a common upgrade for older Civic and Integra models. The availability of aftermarket support for performance parts and tuning makes it a highly desirable engine for enthusiasts and tuners.

How much power can a K20A2 handle when tuned?

In its stock form, the K20A2 produces around 200 PS. With a good remap and basic bolt-on modifications like an intake and exhaust, it's possible to see figures between 220-240 PS. With forced induction (turbo or supercharger), the stock internals can reliably handle 350-400 PS. However, for power levels beyond that, forged internal components are recommended for longevity.

What are the signs of a failing timing chain on a K20A2?

The most notable sign of a failing timing chain or tensioner is a metallic rattling noise from the front of the engine, particularly on cold startup. This rattle is a clear indication that the chain is slack and not being properly tensioned. Immediate inspection and replacement are critical to prevent the chain from skipping a tooth, which could lead to catastrophic engine failure.

Can I increase the redline on my K20A2?

The stock redline for the K20A2 is 8,200 RPM. It's generally not recommended to increase this without first upgrading the valve springs and retainers to prevent valve float at higher RPMs. A proper tune is also required to adjust fuel and ignition maps for the increased RPM. Always consult a specialist to ensure engine safety.

What is the difference between K20A and K20A2?

The K20A is the Japanese market engine found in the Civic Type R (EP3 and FD2), while the K20A2 is the European/US market equivalent. The key differences lie in minor components such as the exhaust manifold, camshafts, and ECU tune, giving the K20A a slight edge in factory power output. Both share the same block and are highly similar in design.