Source P300 engines from vetted UK specialists. Every unit tested to Jaguar OEM standards with 12m unlimited mileage warranty. Compare quotes & save up to 60% online.
Need a reliable replacement engine for your Jaguar F-Type P300?
Engine Finders specializes in F-Type P300 engines with solutions for common supercharger and oil pump failures.
Complete rebuilds addressing supercharger and oil pump wear issues.
Factory-standard rebuilds with updated components for reliability.
Thoroughly inspected units with verified supercharger functionality.
Direct swap engines with verified performance for X152 platform.
Restored units with enhanced supercharger and oil system components.
Affordable options with verified mileage and service history.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Jaguar F-Type P300 replacement engines. From the PT204 petrol to the 204DTD diesel variants, we address F-Type P300-specific failures like timing chain tensioner wear in the PT204 (X152, 2018-2024) and EGR cooler clogging in the 204DTD (2019-2020). Whether you need a replacement due to turbo wastegate rattle in the AJ126 or supercharger clutch degradation in the early AJ300P, Engine Finders makes it easy to locate the right engine, fast.
We replace the PT204 timing chain tensioner (OEM C2D27891) with upgraded components known to fail in F-Type P300 (X152, 2018-2024) due to aggressive VANOS calibration - addressing Jaguar Service Bulletin JTSB-19-04 with OEM-spec rebuilds.
Our reconditioned 204DTD engines include updated EGR coolers (OEM LR092317) specifically for the F-Type P300 D’s unique stop-start mapping, which causes premature clogging per Jaguar TSB JTSB-20-03 - unlike other Jaguar diesel variants.
The AJ300P (2018-2020) suffers from Eaton supercharger clutch wear due to P300-specific torque curves. We rebuild with OEM-spec clutches (part #C2C31984) and recalibrate oil feed lines to eliminate slippage under UK driving conditions.
The AJ126 (2020-2024) features a Garrett GTX1454R turbo prone to wastegate rattle from P300-specific boost mapping. We install reinforced wastegate arms (OEM C2E44102) and recalibrate actuator preload to restore OEM response.
The 204DTD’s high-pressure fuel pump (HPFP) fails early due to P300-specific rail pressure spikes. We fit Bosch-spec HPFPs (OEM LR087421) with reinforced cam followers - addressing failure patterns documented in Jaguar TSB JTSB-19-08.
All engines are dyno-tested to replicate F-Type P300 (X152) torque curves and include correct engine mounts (OEM C2B18733), wiring harness brackets, and AWD transfer case alignment - ensuring plug-and-play installation with no ECU reprogramming.
Unlike imported units, our F-Type P300 engines are rebuilt in UK workshops using Jaguar-approved tolerances, include full service history documentation, and come with a 12-month parts-and-labour warranty covering P300-specific failure points.
We only partner with UK garages certified in Jaguar X152 diagnostics, ensuring correct post-install calibration of the P300’s unique torque vectoring AWD system and emissions compliance for post-2020 WLTP models.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Jaguar F-Type P300 replacement engines. Whether you need a replacement due to specific timing chain tensioner failures in the PT204 or EGR cooler clogging in the 204DTD, we make it easy to locate the right engine, fast.
The Jaguar F-Type P300 (X152, 2018-2024) represents the accessible entry point into Jaguar's sports car lineup, offering both 2.0L turbocharged petrol engines and 3.0L supercharged V6 options. The 2018-2020 AJ300P supercharged V6 suffered from clutch degradation (Jaguar TSB JTSB-18-12), while the 2018-2024 PT204 petrol turbo experienced timing chain tensioner wear (OEM C2D27891). The 2019-2020 204DTD diesel variant was prone to EGR cooler clogging due to P300-specific emissions mapping (TSB JTSB-20-03). The 2020+ facelift AJ126 introduced updated turbocharger specifications (Garrett GTX1454R) to meet WLTP requirements, addressing earlier wastegate rattle issues.
The F-Type P300 features multiple engine configurations across its production run, each with specific failure patterns and replacement considerations for the X152 chassis. These engines were calibrated specifically for the P300's AWD system and emissions requirements, requiring model-specific rebuild components and procedures.
Each engine code was specifically calibrated for the F-Type P300's unique AWD torque distribution and emissions requirements. The P300's ECU programming differs significantly from other F-Type variants, requiring engine swaps to maintain proper drivetrain integration and emissions compliance.
For F-Type P300 owners, we offer multiple engine options including used, reconditioned, rebuilt, and remanufactured units. Used engines provide immediate availability at lower cost but carry unknown failure risks, particularly for PT204 timing chain tensioners. Reconditioned engines offer the best value for F-Type P300 owners, addressing known failure points with upgraded components while maintaining OEM specifications.
All F-Type P300 engines undergo compatibility verification for X152 chassis codes and include necessary mounting hardware, wiring harnesses, and ECU mapping to ensure seamless integration with the P300's AWD system.
Our reconditioned F-Type P300 engines include comprehensive component upgrades addressing the most common failure points specific to each engine code. Each rebuild incorporates Jaguar-specified tolerances and includes all necessary components for direct fitment to the X152 chassis.
Every F-Type P300 engine undergoes dyno testing to replicate X152 torque curves and emissions specifications, ensuring proper integration with the P300's AWD system and post-installation ECU compatibility.
All reconditioned and rebuilt F-Type P300 engines come with a comprehensive 12-month parts-and-labour warranty covering normal operation. The warranty specifically addresses P300-known failure points including timing chain components, EGR systems, and supercharger assemblies when they fail due to normal wear.
Engine Finders is a price comparison website and does not directly supply engines. Warranty terms are provided by individual suppliers and may vary. Please verify specific coverage details with your chosen supplier before purchase.
When your engine fails, Jaguar F-Type P300 engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Initial Inspection & Diagnostics: Experts use Jaguar-specific diagnostic tools to identify P300-specific issues like timing chain wear in PT204 engines (X152 chassis) and document all failures before disassembly. Specialized equipment tests compression, oil pressure, and emissions systems unique to the F-Type P300's AWD calibration.
3. Component Replacement: For F-Type P300 PT204 engines, technicians replace timing chain tensioner (OEM C2D27891), VANOS units, and cylinder head gaskets with Jaguar-approved parts. Each component is fitted using P300-specific torque specifications and installation procedures per Jaguar service documentation.
5. Quality Testing & Validation: Completed P300 engines undergo dyno testing to replicate X152 torque curves and emissions specifications. Specialists verify proper AWD system integration and post-installation ECU communication to ensure seamless operation with the F-Type P300's unique drivetrain.
2. Engine Disassembly & Cleaning: Technicians carefully disassemble P300 engines using specialized tools for Jaguar-specific components like the supercharger clutch in AJ300P (OEM C2C31984). All parts are cleaned and inspected for P300-specific wear patterns identified in Jaguar TSB JTSB-18-12.
4. Reassembly & Calibration: During reassembly, F-Type P300 engines receive updated software calibration specific to X152 chassis codes and emissions requirements. Torque specifications are adjusted for P300-specific components like the Garrett GTX1454R turbo in AJ126 models.
6. Final Inspection & Delivery: Before delivery, experts verify all P300-specific components function correctly including AWD integration, emissions compliance, and ECU mapping. Engines are prepared with correct mounting hardware (OEM C2B18733) for direct X152 chassis fitment.