Secure enquiry - no spam, no pressure. Genuine quotes only.
Need a reliable replacement engine for your Rolls-Royce Ghost Series II?
Engine Finders specializes in Ghost Series II engines with solutions for common V12 issues,
including timing chain tensioners, oil pump upgrades, and hybrid module recalibrations across all
variants.
Precision rebuilds addressing N74 V12 carbon buildup and valvetrain wear.
Full factory-spec restoration with updated oil cooling and gasket seals.
Inspected units with serviced high-pressure fuel pumps and turbochargers.
Direct-swap 6.6L V12 engines for efficient, professional grade recovery.
Cleaned and dyno-tested to ensure peak torque and refinement.
Cost-effective, low-mileage units sourced from verified donor vehicles.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Rolls-Royce Ghost Series II replacement engines. From the V12 and V8 petrol units powering all Ghost Series II variants to the shared components that can experience wear across the range, we ensure you get a solution tailored to series-wide performance and reliability. Whether addressing known issues like crankcase ventilation faults in all V12 engines or high-pressure fuel pump concerns across V8 variants, Engine Finders makes it straightforward to find the right engine fast.
All V12 engines across the Ghost Series II use OEM part 67601438085 for the crankcase ventilation system. Engine Finders replaces and upgrades these components, addressing oil leakage and pressure build-up common across the series, ensuring long-term reliability.
Across all Ghost Series II V8 variants, the high-pressure fuel pump (OEM 17518651123) is prone to wear after 60,000 miles. Engine Finders installs fully tested replacements, eliminating series-wide fuel delivery issues with precision.
Ghost Series II V8 variants share the same twin-scroll turbo architecture (OEM 11657803724). Engine Finders reconditions all turbos to OEM specs, resolving recurring boost pressure inconsistencies across the entire series.
Both V12 and V8 engines in the Ghost Series II experience EGR carbon accumulation (OEM 11618516477), leading to reduced performance. Engine Finders performs series-specific cleaning and upgrades, preventing repeat failures across all variants.
The Ghost Series II shares coolant thermostats (OEM 11538624368) and water pump designs between V8 and V12 engines. Engine Finders ensures all replacements are pressure-tested, preventing series-wide overheating and component stress.
All Ghost Series II engines utilize variable valve timing systems (VVT OEM 11367588879). Engine Finders recalibrates and replaces worn VVT components, addressing timing irregularities found across V8 and V12 units alike.
Across the entire Ghost Series II, oil pump failures (OEM 11367598033) can affect engine longevity. Engine Finders upgrades and balances pumps, ensuring series-wide lubrication stability and preventing premature wear.
Engine Finders services mass airflow, oxygen sensors, and ECUs (OEM 17517567890) across all Ghost Series II variants, ensuring series-level compatibility and resolving shared diagnostic trouble codes for consistent performance.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Engine Finders connects UK owners with specialists providing reliable, reconditioned Rolls-Royce Ghost Series II replacement engines. Whether addressing the N74 V12 carbon buildup issues or cooling system vulnerabilities shared across the 2014–2020 production cycle, we offer series-wide engineering solutions.
The Ghost Series II represents a critical technical evolution of the original 200 series chassis (2014–2020), refining the 6.6-litre twin-turbocharged V12 architecture. While the series introduced Satellite Aided Transmission and improved dampers, the underlying N74B66 power units remained susceptible to high-pressure fuel pump (HPFP) wear and oil filter housing gasket leaks common to the entire Ghost platform. Technical bulletins often highlight that the shared cooling system components across both Standard and Extended Wheelbase variants are prone to age-related brittleness. Ensuring a replacement engine has been updated with revised gasket sets and checked for the carbon accumulation typical of direct-injection V12s is vital for maintaining the "Planar" ride quality and silent performance synonymous with this generation.
The Ghost Series II relies on a unified engine family, though power outputs vary slightly between the standard and Black Badge iterations across the 2014–2020 era.
Because these engines are shared across the Ghost Series II range, failure points such as the 12-cylinder spark plug coil degradation (12138616153) are universal requirements for any high-quality engine rebuild.
For owners of Ghost Series II models, sourcing a used engine requires caution regarding the N74 engine's complex twin-turbo system. We recommend specific tiers of replacement based on the series' shared architecture:
Every unit sourced through our network is verified against the specific Ghost Series II chassis requirements, ensuring seamless integration with the complex 8-speed ZF electronics.
Our specialist stock of Ghost Series II V12 engines undergoes a rigorous rebuilding process tailored to the N74 family. Each engine is stripped and rebuilt with components that address the series' known weak points.
All N74B66 units undergo extensive dyno testing to simulate the effortless torque delivery required by both standard and Black Badge Series II models.
We provide peace of mind for the entire Ghost Series II range with comprehensive warranty terms that reflect the premium nature of these V12 powerplants.
Engine Finders is a price comparison and specialist sourcing platform. Warranty contracts are held directly with the vetted UK suppliers; terms may vary based on engine age and technical specification.
When your engine fails, Rolls-Royce Ghost Series II engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Teardown & Inspection: The N74B66 is stripped using Rolls-Royce specialist tools. Cylinder liners are measured for wear specific to the Series II’s higher boost pressure. The valvetronic system is inspected for worn eccentric shaft gears.
2. Block & Head Machining: The aluminium block is checked for warpage and re-honed. Cylinder heads are skimmed minimally, as the Series II’s direct injection is sensitive to compression ratio changes. Valve guides are replaced as standard.
3. Component Replacement: All 24 injectors are ultrasonically cleaned and flow-tested. The twin turbochargers are refurbished or replaced with balanced cartridges. The updated high-pressure fuel pump (OEM 13537585210) is always fitted.
4. Reassembly with Upgrades: Engines are rebuilt using torque-to-yield bolts and updated gasket sets. The timing chains and guides for the valvetronic system are replaced using the special locking tool (RR-83400) for Series II.
5. Ancillary Integration: The engine is married to a tested ancillary kit, including the Series II-specific AC compressor and PAS pump. The ECU is flashed with the latest software patch addressing cold-start rattles.
6. Dynamic Bench Testing: Before dispatch, the engine undergoes a hot test on a dyno, simulating load to verify oil pressure, cooling, and the operation of the variable valve and turbo systems under Series II parameters.