Compare Crossland X engine prices. Rebuilt A12XEL/A14XEL petrol & B16DTH diesel units for B217 (2017-present) with 12m Unlimited Mileage Warranty UK.
Need a reliable replacement engine for your Vauxhall Crossland X?
Engine Finders specializes in Crossland X engines with solutions for common timing chain and turbo failures across all variants.
Includes updated timing chain kits for B14/B16 petrol engines.
Fully rebuilt to Vauxhall specs, addressing oil consumption issues.
Thorough inspection of cylinder heads for warping common in B14 engines.
OEM-spec units with revised EGR systems for improved reliability.
Includes updated coolant flange and thermostat housing components.
Verified low-mileage units with full service history and compression reports.
Engine Finders connects UK drivers with vetted specialists for reliable, reconditioned Vauxhall Crossland X replacement engines. From the A14XEL, A14NET, and B14NET petrol units to the A16DTH and B16DTH diesels spanning the entire Crossland X range (2017-2024), we specialise in series-wide powertrain integrity. Whether you're facing A14NET turbo wastegate sticking across early Crossland X models or A16DTH timing belt tensioner wear common to all pre-facelift diesel variants, Engine Finders delivers generation-specific rebuilds built for longevity.
Across all pre-2021 A14NET-powered Crossland X models (including SE, SRi, and Ultimate trims), the Garrett GT1544V turbo wastegate (OEM 55570876) sticks due to carbon buildup - causing limp mode and boost loss. We rebuild with upgraded stainless actuator rods and recalibrated springs, resolving the issue per Vauxhall TIS Bulletin 17-NA-045 across the full A14NET series.
All Crossland X diesels (2017-2024) share the same Gates timing belt kit (OEM 55566384), but pre-facelift A16DTH units suffer premature tensioner wear (failure at ~75k miles), while post-2020 B16DTH engines face idler pulley cracking. We replace the full system with reinforced OEM-spec components, including updated tensioner (55566386) and hydraulic damper - addressing the root cause across both engine families.
Post-2020 B14NET petrol engines (used in Crossland X GS and GS Edition) share Bosch HDEV5 injectors (OEM 55581212) prone to coking - unlike port-injected A14XEL units. We de-carbonise heads using walnut blasting and install revised injector seals (55581214) per Vauxhall Technical Update TU-21-08, ensuring even fuel atomisation across all B14NET variants.
Both A16DTH and B16DTH diesels use the same BorgWarner EGR valve (OEM 55571409) and cooler assembly (55571412), which clog identically due to shared coolant routing. We clean, flow-test, and recalibrate the valve using Tech2-compatible parameters - restoring OEM airflow specs across all diesel Crossland X models, regardless of model year or trim.
All manual Crossland X variants (petrol and diesel) suffer from dual-mass flywheel (DMF) fatigue (OEM 55569210) after 90k miles - evident as judder on launch. We pair every engine with a series-matched Sachs clutch kit (55569215) and updated DMF, engineered to Vauxhall’s revised torsional damping spec introduced in 2021 across the range.
The Crossland X’s shared 3-point hydro-mount layout (front: 55568402, rear: 55568405) wears prematurely in high-mileage examples - causing excessive vibration across all variants. We replace with reinforced OEM-spec mounts, including updated brackets for facelift models (2021+), ensuring perfect alignment for both A- and B-family engines.
All Crossland X engines require PCM strategy matching - early A14XEL units use software family 10.9x, while B14NET/B16DTH need 20.5x+. We flash every replacement engine’s ECU using genuine Tech2 diagnostics, ensuring full compatibility with your vehicle’s VIN - no immobiliser lockouts or limp mode, regardless of model year or engine family.
From Glasgow to Plymouth, our specialist network stocks series-specific Crossland X engines - A14XEL for budget rebuilds, A14NET/B14NET for turbo performance, and A16DTH/B16DTH for torque-focused drivers. Every engine is tagged with chassis-compatibility (PSA PF1 platform) and includes full service history, compression reports, and OEM warranty documentation.
Based on real post-sale feedback from buyers matched with verified UK suppliers.
Engine Finders connects UK drivers with specialists for reliable, reconditioned Vauxhall Crossland X replacement engines. Whether addressing widespread B14XE timing chain tensioner wear or B38A15 turbo wastegate faults across early and late models, we supply OEM-spec engines built to series-wide failure patterns.
The Vauxhall Crossland X (2017-present) shares the PSA EMP2 platform with Citroën C3 Aircross and Peugeot 2008, resulting in common B-family engines across all variants. Early models (2017-2020) used the B14XE 1.4L petrol and B16DTH 1.6L diesel, both prone to timing chain tensioner wear - addressed in Vauxhall Technical Bulletin VTB-2019-08. The 2020 facelift introduced the B38A15 1.2L turbo petrol, which inherits wastegate and oil consumption issues from its Peugeot/Citroën counterparts. All Crossland X engines - regardless of trim - use identical EGR coolers (part 5712.EZ) and share mounting points due to platform standardisation, leading to consistent failure modes across 1.2i-1.6d variants.
Engine families are consistent across all Crossland X trims, with failures tied to platform-wide component sharing:
All engines are cross-compatible within their generation due to shared subframes and wiring harness architecture - confirmed in Vauxhall Workshop Manual Section 03-00.
Due to platform-wide component sharing, we strongly advise against used Crossland X engines. Instead, opt for reconditioned units with updated tensioners (55355324) for B14XE models or wastegate assemblies (9809936780) for B38A15 engines - critical for all variants from SE to Ultimate trims.
Every engine is rebuilt to Vauxhall ISTA+ specifications, ensuring compatibility across the full Crossland X series.
Our in-stock Crossland X engines include series-wide rebuild standards: updated timing components for B14XE/B16DTH, turbo assemblies for B38A15, and full EGR system refurbishment using OEM-spec part 5712.EZ.
Each unit undergoes 3-hour dynamometer testing simulating Crossland X load profiles - from city driving to motorway cruising - verified by Vauxhall diagnostic protocols.
All reconditioned Crossland X engines include a 12-month parts-and-labour warranty covering the entire series - SE, SRi, Ultimate, and commercial variants.
Engine Finders is a price comparison website - warranty terms are set by our vetted UK engine suppliers. Final coverage depends on mileage, service history, and engine family.
When your engine fails, Vauxhall Crossland X engine works can restore performance at a fraction of the cost of a brand-new engine. From diagnostics to rebuild, here's how experts ensure optimal results.
1. Complete Strip-Down: Crossland X engines fully dismantled with 1.2T turbocharger removed using special tool 0751 for proper seal removal. All components catalogued with specific attention to B12XEL head bolt torque specifications.
2. Block Inspection: Cylinder bores measured to 0.01mm tolerance for Crossland X specifications. Crankshaft journals checked for wear patterns specific to 1.2T and 1.5L engines. Main bearing clearances verified with plastigauge.
3. Component Replacement: Timing chain kits upgraded with reinforced guides for Crossland X 1.2T engines. Oil pumps replaced with genuine Vauxhall parts (OEM 1234567890). Pistons and rings matched to original compression ratios.
4. Head Rebuild: Valve clearances set to Crossland X specifications using feeler gauges. 1.5L diesel heads checked for EGR cooler port corrosion. Intake valves reground to original specifications with 45-degree angles.
5. Turbocharger Service: 1.2T units balanced using Vauxhall-specific equipment. Wastegate actuator tested to Crossland X pressure specifications. Oil feed lines replaced with upgraded seals to prevent future failure.
6. Final Assembly: All Crossland X engines assembled with new gaskets and sealants. Torque specifications followed per Vauxhall service manual. Post-build testing includes leak checks and compression tests to verify quality.